Wii Games For Usb Loader Gx

admin

Loader

If you followed my previous post on attaching a USB hard drive to your Wii, you now should have the convenience of loading games directly from your hard drive without ever having to worry about swapping discs. Yet having to load the Homebrew channel, then going through to your USB loader can feel cumbersome sometimes. Getting channels to go directly to the games, or the USB Loader is easier than you would think.

I installed wii usb gx loader and im using it to backup my wii games iso on my drive. So lately I ran out of good games to play and I asked some of my friends for suggestion, one of my friends has many ntcs-j games that my wii probably cant run since its ntsc-u. USB Loader GX is a very popular program for the softmodded Wii console and one of the first widely accepted backup loaders for the Wii console. Most information in this guide was borrowed from the USB Loader GX online readme. I take no credit for such information or the abilities of the application itself. Usb loader GX is a channel or application in wii which allows you to download wii games and play them! Your wii has to be softmodded for that.

You obviously need to have the Homebrew Channel plus a USB loader installed before you can do any of this. If you don’t, follow these steps then come back here once you’re done. Please note that the steps here can and might damage your Wii! I very highly recommend you install BootMii into boot2 and back up your NAND before attempting any of the following steps. Should anything go wrong, you have a backup you can fall back on, otherwise you are continuing at your own risk!

Prerequisite Steps

  • Download and install WAD Manager.
  • Create a “/wad” folder on your SD card (must be on the root of the card!) Any channels that you want to install must be placed here or else the WAD Manager will be unable to find them.

There’s two options from here on out, and you’re welcome to do both. You can just install a usb forwarder channel that will allow you to access your USB Loader from the main menu, or install channels for individual games so that they show up on the main menu.

Installing USB Loader Forwarder Channel

There’s quite a few USB forwarder channels out there, but they all do pretty much the same thing. A USB forwarder channel looks in specific directories for an installed USB loader and tries to run it. The advantage of this is that it makes it simple to upgrade your USB loader without ever having to mess with the forwarder channel, since you can just swap the boot.dol to a newer version.

To make things easier, you can download the one I use: Universal Forwarder Channel by Narolez. This forwarder looks in the following locations for a USB Loader boot.dol:

  • sd:/apps/usbloader_cfg/boot.dol
  • sd:/apps/usbloader/boot.dol
  • usb:/apps/usbloader_cfg/boot.dol
  • usb:/apps/usbloader/boot.dol

Wii Games For Usb Loader Gx

Forwarder Installation

  • Copy the .wad file to “sd:/wad”.
  • Load up WAD Manager in homebrew, find your wad, and choose to install.

You should now have the channel correctly installed, and should be able to access your USB loader directly from the main menu! If at any time you need to uninstall the channel from your Wii, you can follow the installation steps above, choose the same wad file, then choose to uninstall and the channel will be removed from your system.

Installing Channels for Individual Games

Installing games already on your USB hard drive is pretty simple, just be sure you already have the games loaded onto you hard drive via USB Loader. You also need to download CRAP in order to assist with the channel creation.

Channel Installation Steps

Loader
  • Plug in your usb hard drive to your computer.
  • Launch CRAP.
  • Select the drive letter of your USB hard drive, i.e. J:.
  • Choose the game which you wish to create a channel for.
  • Select a loader. Most of the time you should be fine with using USB Loader 1.6, but you may need to use a different loader depending on what options you want to apply to the channel.
  • Click on “create channel”
  • Your wad will be saved in the WAD directory of your CRAP folder, so you will need to copy/move this wad to your USB hard drive.
  • Plug your USB hard drive back into your Wii, load up WAD manager via homebrew, find the wad you just created and install it.
  • If at any time you need to uninstall this channel, simply load up the WAD manager, find your wad, and select “uninstall” instead of install.

Load Wii Games Usb Loader Gx

You should now have a channel listed on your main menu for your game, and you can repeat the above steps for any additional games you wish to install.

How To Download Free Wii Games For Usb Loader Gx

There may be an occasional issue with a couple of games depending on what version of cIOS38 your are currently running. cIOS38 rev. 14 unfortunately breaks dual-layed disc compatibility, so games such as Smash Bros. Brawl or Metroid Prime Trilogy will not work in USB Loader. Wii Sports Resort will not work via the channel method if you >13 installed, so you may want to pick and choose what cIOS38 you are running based on what games you want to install as channels.